Inverters - Xantrex XW Series

Energy Production Solar Panels Generators Wind Power Hydro-Electric For the Home Refrigeration Fans & Ventillation Tankless Water Heaters Gas Room Heaters Composting Toilets Lighting Solar Water Pumping Books & Videos Inverters Solar Oven System Control Charge Controllers Meters & Monitors Fuses & Circuit Breakers Transformers & Converters Cables and Interconnects Batteries PV Panel Mounting Solar Hot Water Solar Gadgets & Gismos

Xantrex XW Series

The Xantrex XW Series hybrid inverter/charger offers an innovative, integrated design which minimizes external balance of system components allowing for much quicker and easier installation. The XW Series offers pure sine wave capability as well as split-phase operation right out of the box for 120 VAC and/or 240 VAC solutions. Up to three units can be operated in parallel, offering 18kW, 120/240 VAC power.
Certified to UL-1741 and CSA for grid-tie applications, the XW can also be used as a grid-tie battery-backup inverter or an off-grid inverter. One or two XW MPPT charge controllers are required for PV grid-tie operation. Unsurpassed surge capacity is achieved by using digital control to regulate the output voltage from dropping during surge. A full 200% rated output power is delivered to load under surge conditions. Efficient, power-factor-corrected, high-current multi-stage battery charging minimizes recharge time and electricity/fuel costs, and prolongs battery life.
The inverter display panel gives status-at-a-glance. LEDs indicate AC-in status, faults/warnings, equalize mode, and battery state of charge. Three-character LCD indicates output power or charge current.
The new wall-mount design is easier to install than the SW power panel. The power distribution panel includes all AC/DC disconnects and wiring so there is no need to individually purchase separate components. The distribution panel and conduit box is factory wired and labelled to support one inverter in a code-compliant manner. It has wiring space and conduit and breaker knockouts to add up to three inverters and/or four charge controllers. Field-reversible door with magnetic catch makes access to wiring easy.
Options include an XW connection kit for a second inverter, an XW conduit box for systems with more than two inverters or to retrofit XW inverters into existing systems which already have AC/DC disconnects. Conduit box/raceway has barriers to ensure separation between low-voltage communication cables and AC and DC wires.
XW-MPPT60-150 60A Solar Charge Controller with integrated PV ground fault protection accepts arrays with open-circuit voltage up to 150 VAC and employs dynamic maximum power point tracking. The XW system control panel plugs into Xanbus network and provides a central user interface to configure and monitor all components in the system.
5-year warranty. Dimensions of the inverter are 16” x 23” x 9”. The inverter is field-serviceable without needing to remove it from the wall.