Inverters - Enphase Grid-Tie Micro-Inverters

Energy Production Solar Panels Generators Wind Power Hydro-Electric For the Home Refrigeration Fans & Ventillation Tankless Water Heaters Gas Room Heaters Composting Toilets Lighting Solar Water Pumping Books & Videos Inverters Solar Oven System Control Charge Controllers Meters & Monitors Fuses & Circuit Breakers Transformers & Converters Cables and Interconnects Batteries PV Panel Mounting Solar Hot Water Solar Gadgets & Gismos

Enphase Grid-Tie Micro-Inverters

The Enphase Micro- Inverter system is the first commercially available micro-inverter system for residential and commercial solar PV applications. It is a fully-integrated device that converts the DC output from a single solar module into grid-compliant AC power. The microinverter system is designed to maximize energy harvest, increase system reliability and dramatically simplify design, installation and system management.

Each micro-inverter is mounted to the module racking structure and connected directly to the DC wires from each PV module. The micro-inverter AC wire harnesses are connected together to form a continuous AC branch circuit that is connected to the AC utility distribution center. Each PV module is individually power tracked by a microinverter, eliminating power loss caused by a few underperforming modules in the array. Now you can realize the full energy potential of every PV array, reducing the powerlimiting effects of shading, dust, debris, module mismatch, and thermal differences. Problems are now isolated to a small fraction of the PV array, while the rest of the PV system continues to function normally. Service becomes routine maintenance rather than a costly emergency.

The Enphase Micro-Inverter system includes advanced communication, performance visualization and data analysis on a per-module basis. Every micro-inverter communicates with the Enphase Enlighten website to show you a physically accurate representation of your individual system and how each PV module is performing in real time. Data is monitored 24/7 and Enlighten will immediately notify you via email of any issues it detects. For example, Enlighten will notify you if an individual module is underperforming.

The Enphase is designed for input from most 150- to 230- watt modules. Order one install kit for each AC branch circuit of up to 16 inverters in a 240-volt system and one for each 26 inverters in a 208-volt system. One IEMU-01 is required for Internet monitoring on each installation. Specify which type of MC connector your modules have. Call for information about commercial monitoring. 15 year warranty.