This submersible DC pump was designed for use in wells, ponds, cisterns and streams. All components except the diaphragm and case are constructed of stainless steel and brass. The model 9300 can be easily rebuilt in the field without special tools. The newly improved diaphragm is now rated at 2500 to 4000 operating hours. Designed for flow rates from 30 to 111 gallons per hour (or up to 1000 gallons per day), it will deliver water from up to 230 feet. The Model 9300 will operate directly from one or two 32 watt or larger PV modules, or can be run off a 12 or 24 volt battery. If operated in PV direct mode, be sure to use the PCA-10-30 pump controller. For twice the water, they can be installed in pairs. They can also be installed in the same well as an AC pump, to provide extra backup.






• The Shurflo 9300 pump
• The Conergy DL-8B controller
• 2 x 50 watt PV modules (for other modules see below)
• Pole mount
• 200 feet of 10-2 pump cable
• 6" well seal.

> for 2 x 32 watt panels: subtract $100
> for 2 x 80 watt panels: add $250