SunCentric Series Surface Solar Pumps
Use Solar-Electric Power to provide 6,000-30,000 gallons per day from shallow water sources.
The Solar Centrifugal is designed for agricultural use. It can lift water from a shallow well, river or stream, lake, pond, tank or ditch. It has one moving part. No electronics are required. The pump can be powered directly by a photovoltaic array at variable speed, or by a battery system.
Capacity:
90’ max lift, up to 70 gpm
• Total Lift = Vertical distance from surface of the water source to the pipe outlet or top of storage tank.
• Suction capacity is 10 vertical feet (3m) at sea level -- subtract 1 foot for every 1,000 ft. elevation (1m per 1000m). For best reliability, minimize or eliminate suction lift by placing the pump close to the water source.
Power System Requirements:
• Chart indicates power (watts) required at the pump. For a non-battery system, the rated power of the PV array must exceed this number by 25% or more. A solar tracker is recommended to maintain full performance through the day.
• A PV-direct system (using a tank to store water) is simpler than a battery system and generally preferred for reliability and cost.
Fittings:
(female pipe thread): Intake: 1-1/4”, Outlet: 1”
Dimensions:
(approximate)
• Diameter: 7 in (8 cm)
• Length: 19 in (48 cm)
• Weight: 50 lbs (23 kg)
Construction:
• Cast iron body
• Bronze impeller
• Ball bearing permanent magnet DC motor
Warranty- 1 year against defects in materials and workmanship
SunCentric Surface Pumps are available in five different models in a variety of voltages.
Prices range from $761 - $982.
Contact us for specifications and to place an order!
